What timing blt is used for the 7age 20v?

v33sonata
Club4AG Expert
Posts: 224
Joined: Mon Jan 14, 2013 10:38 pm

What timing blt is used for the 7age 20v?

Postby v33sonata » Wed Feb 27, 2013 7:49 am

I know it not the porsche one. Any one else know? Its a 7age 20v BT

gaijin_rokurunner
Club4AG Pro
Posts: 516
Joined: Wed Jan 09, 2013 5:51 pm
Location: PA

Re: What timing blt is used for the 7age 20v?

Postby gaijin_rokurunner » Wed Feb 27, 2013 11:30 am

944 belt...thought u already had a 7age up and running ?.......here is a good write up on doing a 7age swap..http://www.ae82.net/showthread.php?526- ... e-for-AE82
20v power.....powered by Orion's Demise!
Image

v33sonata
Club4AG Expert
Posts: 224
Joined: Mon Jan 14, 2013 10:38 pm

Re: What timing blt is used for the 7age 20v?

Postby v33sonata » Wed Feb 27, 2013 1:18 pm

I do but from what I read when using the BT 20v head you cant use that belt

greenae102
Posts: 7
Joined: Fri Jan 11, 2013 9:59 pm

Re: What timing blt is used for the 7age 20v?

Postby greenae102 » Thu Apr 04, 2013 2:48 pm

v33sonata wrote:I do but from what I read when using the BT 20v head you cant use that belt


Your absolutely right, it the Renault R21 2.0i Turbo 86-95 Timing Belt. I had to order mine from across seas on ebay as no belt in the US that i could find matches it. 16v cam gears are further apart than the 20v so a smaller belt is difinitely needed. i used the 7a tensioner setup on mine tho so im not sure it it will be different with the 20v tensioner
green ae102
7ag 20v installed
my 4 door will own your 2 door!

v33sonata
Club4AG Expert
Posts: 224
Joined: Mon Jan 14, 2013 10:38 pm

Re: What timing blt is used for the 7age 20v?

Postby v33sonata » Sat Apr 06, 2013 8:19 am

greenae102 wrote:
v33sonata wrote:I do but from what I read when using the BT 20v head you cant use that belt


Your absolutely right, it the Renault R21 2.0i Turbo 86-95 Timing Belt. I had to order mine from across seas on ebay as no belt in the US that i could find matches it. 16v cam gears are further apart than the 20v so a smaller belt is difinitely needed. i used the 7a tensioner setup on mine tho so im not sure it it will be different with the 20v tensioner

thank you!