sr85 help

briggsy
Club4AG Regular
Posts: 15
Joined: Wed Jan 09, 2013 4:59 pm

sr85 help

Postby briggsy » Mon Feb 17, 2014 3:03 am

I swapped in a ae92 smallport with a map, engine and dash harness. I have power to the igniter, coil, injectors but it will not start. Anyone have any ideas on where to start?

MisterJerk
Club4AG Pro
Posts: 582
Joined: Wed Jan 09, 2013 6:10 pm

Re: sr85 help

Postby MisterJerk » Mon Feb 17, 2014 7:13 am

power to fuel pump?
Got fuel, spark, air?
Check timing is correct(dizzy is installed correctly)

briggsy
Club4AG Regular
Posts: 15
Joined: Wed Jan 09, 2013 4:59 pm

Re: sr85 help

Postby briggsy » Mon Feb 17, 2014 9:53 am

The fuel pump is direct wired it works I have fuel to the fuel rail. And power to the injectors I dont have a noid light to see if they a getting ecu signal. Got power to the dist, igniter, and coil. I haven't pulled the plug to see if it sparks yet

briggsy
Club4AG Regular
Posts: 15
Joined: Wed Jan 09, 2013 4:59 pm

Re: sr85 help

Postby briggsy » Tue Feb 18, 2014 12:20 am

The harness was missing the 12pin ecu plug. I got one and wired up the battery power and that's where im at crank but no start

User avatar
mad_86
Club4AG Expert
Posts: 390
Joined: Fri Jan 25, 2013 3:40 pm
Location: Socal

Re: sr85 help

Postby mad_86 » Wed Feb 26, 2014 9:18 pm

if your getting spark & fuel

Check timing , make sure cams, crank and Dizzy
Are at TDC (top dead center),
There's chance it's just timing.